AW-10G
AC220V/110V
65-70W
10g/h
--㎡
CE
1. The silica tube has excellent dielectric property, which ensure it can generate ozone stably and constantly.
2. All the nozzles and connectors are made of PTFE, excellent anti-oxidization property.
3. The power supply has potentiometer, which is to adjust ozone output according to the real condition.
4. The installation is simple, we have fixed the high voltage cable connecting points inside/on the ozone tube, so end-users can connect it simply.
1.Designed life span: 20000hrs.
2. Necessary accessory needed:
When air input, air pump recommended is 16-30L/min
When air humdity is more than 60%, you need an air dryer. When less than 60%, no need air dryer.
When oxygen input, oxygen flow recommended is 3L/min. oxygen purity recommended is more than 90%.
3. Need two fans, the size should be 12038 or 15050, one for the tube, the other for the power supply.
4. it doesn't need maintenance.
5. when do water purification, put this device in a higher position than the water level, and if mix ozone with water with venturi, install an effective anti-back flow device to prevent water back flow.
